E3500 system board errors
In one of our E3500 systems, System Board 1 failed and needed to be
replaced by a Sun engineer. Here are some of the error messages we
encountered:
Relevant POST output:
{e} ok show-post-results
Slot 1 - Status=Low Power
Mode, Type: I/O Type 4
Sysio0=P
Sysio1=P FEPS=P
FEPSFC=0 SOC=P
Sbus0=P
Sbus1=P Sbus2=P
AC=P FHC=P
SRAM=P FPROM=P LabCon=Not Ovtemp=Not
TODC=P JTAG=P
CntrPl=P DC=fd
Relevant prtdiag output:
Analysis of most recent Fatal
Hardware Watchdog:
======================================================
Log Date: Mon Jun 9
02:29:39 2003
Analysis for Board 1
--------------------
Board 1 DC 1 Parity Error
Problems during POST:
Fatal Reset
7,0>FATAL ERROR
7,0> At time
of error: System software was running.
7,0>
Diagnosis: Board 1, DC
7,0>Log Date: Jun
9 7:29:39 GMT 2003
7,0>
7,0>RESET INFO for IO Type
4 board in slot 1
7,0> AC ESR
00000000.00000000
7,0> DC[0] 00
7,0> DC[1]
04 PERR
7,0> DC[2] 00
7,0> DC[3] 00
7,0> DC[4] 00
7,0> DC[5] 00
7,0> DC[6] 00
7,0> DC[7] 00
7,0>
FHC CSR 00040000 LOC_FATAL
7,0> FHC
RCSR 02000000 FATAL
7,0>POST Failed
7,0>
7,0> System
Board Status
7,0>-----------------------------------------------------------------
7,0> Slot Board
Status Board Type
Failures
7,0>-----------------------------------------------------------------
7,0> 0 | Not
installed
|
|
7,0> 1 | Low Power
Mode | IO Type 4 | DC
7,0> 2 | Not
installed
|
|
7,0> 3 |
Normal |+IO Type
4 |
7,0> 4 | Not
installed
|
|
7,0> 5 | Not
installed
|
|
7,0> 6 | Not
installed
|
|
7,0> 7 |
Normal
|+CPU/Memory |
7,0> 8 | Not
installed
|
|
7,0> 9 |
Normal
|+CPU/Memory |
7,0> 16 |
Normal | Clock Board |
7,0>-----------------------------------------------------------------
System booting after fatal
error FATAL
NOTICE: failed dual-sbus-soc+
board in slot 1
Back to brandonhutchinson.com.
Last modified: 06/09/2003